44184 – Grip 20000kg Fully Welded Hydraulic Bottle Jack

APPLICATION 

Bottle style hydraulic jack for the lifting of vehicles or other heavy components and / or equipment so that maintenance can be performed.

FEATURES

• Heavy duty steel construction, fully seam welded base and top cap for superior leak resistance

• Full machined steel (not cast iron) heavy duty base plate

• Quality chrome hydraulic ram and piston pump

• Black baked enamel finish for corrosion resistance

• Australian Standard compliance

SAFTEY NOTICE 

• The jack should be used on hard, level surfaces

• The wheels of the vehicle to be chocked

• Do NOT put a portion of your body under a vehicle supported by a jack

• No person should remain in a vehicle that is being jacked

• Do NOT exceed the working load limit

•  

  • Working load limit              :          20000kg
  • Minimum height                  :          240mm
  • Maximum height                :           450mm
  • Hydraulic lift height           :           150mm
  • Screw height adjustment        :    60mm 
  • Base plate dimensions         :    183(L) x 165(W) x 20(H) mm
  • Australian Standard AS/ NZS 2693: 2007
  • Packaged dimensions          :     220(L) x 200(W) x 300(H) mm
  • Packaged weight (nett)          :      18 .4 kg

  Please note: Vertical lifts only, if jack is tilted to any angle other than vertical position from base plate the hydraulic system will not operate.

  MAINTENANCE NOTE

  It is recommended that the oil level should be at approximately 3mm below the oil filler hole.

  To add oil lower the jack to the lowest position, then remove the air vent valve , add oil to desired level , pump jack 5 or 6 times to expel any air in the cylinder, and then fasten the air vent valve . Avoid mixing different types of fluids. Use only ISO 10-5 hydraulic fluid. DO NOT USE BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR DIRTY OIL.ump jack 5 or 6 times to expel any air in the cylinder, and then fasten the air vent valve. Avoid mixing different types of fluids. Use only ISO 10-5 hydraulic fluid. DO NOT USE BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR DIRTY OIL.