Designed for removing harmonic balancers, gear pulleys, timing gears, steering wheels, flywheels or any component with 2 or 3 tapped holes. The 4 elongated hole yoke allows a 2 or 3 hole mounting platform for pulling and provides even pressure. Manufactured from quality drop forged heat-treated carbon steel with an alloy steel forcing screw. The forcing screw has a floating, removable swivel which prevents damage to shaft ends. An assortment of relevant mounting bolts and washers is included. Supplied in a sturdy blow moulded case.
Set contents:
-
1 x 4 hole yoke
-
1 x 5" forcing screw (3/4" – 16 TPI)
-
1 x small centering adaptor
-
1 x large centering adaptor
-
1 x flat shaft adaptor
-
3 x 1-1/2" bolts (3/8" – 24 TPI)
-
3 x 2" bolts (3/8" – 16 TPI)
-
3 x 3" bolts (3/8" – 16 TPI)
-
2 x 4-1/2" bolts (3/8" – 16 TPI)
-
2 x 6" bolts (5/16" – 18 TPI)
-
3 x 3-1/2” (bolts 5/16" – 18 TPI)
-
2 x 3" bolts (5/16" – 24 TPI)
-
2 x 2-1/2” (bolts 1/4" – 28)
-
3 x 35mm bolts M10 x 1.5
-
3 x 45mm bolts M8 x 1.25
-
2 x 65mm bolts M8 x 1.25
-
2 x 90mm bolts M8 x 1.25
-
3 x 5/16" I.D Flat washers
-
2 x 1/4" I.D Flat washers
-
3 x 10mm I.D Flat washers
-
3 x 8mm I.D Flat washers
-
(TPI = Threads per inch measurement)
